DPA MMB4066-B Miniature Microphone Boom - Black

Miniature Microphone Boom and Omnidirectional Capsule

CAP2: 0 $528.00
$440.00 ex VAT
Call or email for availability.

Highly regarded by engineers, a boom and mic only option for those who do not require a headband.

At a glance

  • High SPL capabilities for a miniature microphone
  • Flexible microphone used for speech and vocals in Broadcast, Stage and Television
  • For use with the DPA AHM6001 Adjustable Headband
  • Included Accessories: DUA6002 Miniature Grids, High Boost, Black, 5 pcs plus DUA6001 Miniature Grids, Soft Boost, Black, 5 pcs

The DPA MMB4066-B Miniature Microphone Boom, Black. Highly regarded by engineers, a boom and mic only option for those who do not require a headband.

The DPA MMB4066-B is a Miniature Microphone Boom and Omnidirectional Capsule, for use with the DPA AHM6001 Adjustable Headband. The 4066 offers a clean and transparent sound quality with lots of headroom. Attention has been paid to the humidity problems that often occur in theatrical applications. A double vent protection system, a drop stopper on the microphone boom, together with water resistant materials inside the microphone, makes it more than difficult for the humidity to cause the microphone to fail. The sensitivity is 6 mV/Pa to match the level of the human voice to the general input sensitivity of most wireless transmitters. If powered correctly the microphone will be able to handle sound pressure levels up to 144 dB SPL before clipping occurs. A wide range of connection adapters makes it possible to use the 4066 with most of the professional wireless systems available plus 48 V phantom XLR connection. The DPA 4066 is delivered with 5 foam windscreens.


  • Principle of operation: Pressure
  • Cartridge type: Pre-polarised condenser element with vertical diaphragm
  • Power supply: Min. 5 V - max 50 V through DPA adapter
  • Frequency range, ± 2 dB: Soft boost grid: 20 Hz - 20 kHz, 3 dB soft boost at 8 - 20 kHz, High boost grid: 20 Hz - 20 kHz ±2 dB, 10 dB boost at 12 kHz
  • Directional characteristics: Omnidirectional
  • Equivalent noise level A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
  • Equiv. noise level ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
  • Total harmonic distortion (THD): <1% THD up to 123 dB SPL peak
  • Preamplifier frequency range: 20 Hz to 50 kHz (+0 dB/-3 dB)
  • Output impedance: 30 - 40 Ohm
  • Cable drive capability: Up to 300 m (984 ft)
  • Microphone length: 12.7 mm (0.5 in)
  • Max. SPL, peak before clipping: 144 dB
  • Weight: <14 g (0.5 oz) incl. cable and MicroDot connector
  • Cable length: 1.2 m (3.9 ft)
  • Cable colour: Black
  • Colour: Black
  • Dynamic Range: Typ. 97 dB
  • S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL): 68 dB(A)
  • Connector: MicroDot
  • Sensitivity, nominal, ±3 dB: 6 mV/Pa; 44.5 dB re. 1 V/Pa

Alternative Products