Amphion Atmos (3x218,4x118,4x115,1xFlexbase,Amp400.8,2xAmp70

The Amphion Atmos Bundle includes all the speakers necessary to set up an Atmos system.

The bundle includes:

• 3x Amphion Two18
• 4x Amphion One18
• 4x Amphion One15
• 1x Amphion Flexbase
• 2x Amphion Amp700
• 1x Amphion Amp400.8

Amphion Two18

The Amphion Two18 is a two-way, passive studio monitor with a passive radiator designed to provide a new level of monitoring excellence.

The Amphion Two18 is a high-resolution nearfield studio loudspeaker using a passive radiator at the back for extended LF response. It uses two 6.5" aluminium woofers and a 1" soft dome titanium tweeter.  The Two18 are extremely natural sounding with a balanced and musical tonality as well as highly accurate phase coherence even at low levels.

The Two18 displays the same high-level midrange integration and low crossover point as other Amphion studio monitors which ensures unrivalled detail and clarity. Moreover, the Two18 produce predictable results which translate well on other setups and systems. This is very useful for mixing and mastering engineers who require a trustworthy and predictable reference. Its natural timbre and high resolution allow for extended use without incurring listening fatigue.

The Two18 lets you hear reverb tails clearly, fast sharp transients which translate in superb imaging, spatial and dynamic detail.

Amphion One18

The Amphion One18 is a two-way passive high-resolution studio monitor designed to work as nearfield monitors in smaller rooms.

The Amphion One18 produces a superbly balanced sound with high-level midrange integration for a really detailed sound and superior clarity even at lower listening levels. The One18 like all speakers in Amphion's professional range uses a low crossover frequency and high-level driver to maintain an accurate phase response and imaging. In addition, the One18 delivers a pleasing timbre with no unnatural sounds to create a natural and musical sounding monitor with no harshness. The passive radiator at the back of the unit allows for an extended low-frequency response.

Another benefit of Amphion's natural balance and high level of midrange means that the monitoring doesn't suffer from a poorly designed monitoring setup as much as many other speakers and can serve as a consistent, predictable reference. This is truly useful for mastering engineers.

Amphion One15

The Amphion One15 is a two-way passive high-resolution studio monitor with a passive radiator designed to work as nearfield monitors in smaller rooms.

The Amphion One15 produces a truly stunning and balanced sound with high-level midrange integration for a really detailed sound and superior clarity even at lower listening levels. The One15 like all speakers in Amphion's professional range uses a low crossover frequency and high-level driver to maintain an accurate phase response and imaging. In addition, the One15 delivers a pleasing timbre with no unnatural sounds to create a natural and musical sounding monitor with no harshness.

Another benefit of Amphion's natural balance and high level of midrange means that the monitoring doesn't suffer from a poorly designed monitoring setup as much as many other speakers and can serve as a consistent, predictable reference. This is truly useful for mastering engineers.

Amphion Flexbase25

The Amphion FlexBase25 is a stereo bass extension and management system with a dedicated LFE channel input designed to provide extreme precision in the lowest octave.

The Amphion FlexBase25 provides an unconventional approach to the subwoofer with a 10" woofer on each side and a third input specifically for LFE applications. A variable crossover between 35 and 260Hz lets you precisely set your speaker to integrate in your room or change the desired flavour of the system. It also lets you adjust the stereo spread for optimum integration even with higher crossover points.

The dedicated LFE channel offers 10dB more sensitivity compared to the main channels but has no built-in low-pass filtering. It can be linked between several units allowing the build of 7.1 systems or more.

The FlexBase25 is powered by the FlexAmp1200 which includes Amphion's proprietary filter module and delivers 1400W of power with improved control, more speed and power, lowered distortion and improved headroom for better translation.

Amphion Amp700

The Amphion Amp700 is a Class D stereo amplifier with a Class A buffer-stage capable of delivering enough power to all Amphion speaker models.

The Amphion Amp700 provides 2x350 Watts into 8 Ohms and 2x700 Watts into 4 Ohm with vanishingly low distortion and high resolution across the entire frequency spectrum. 

The Class A buffer-stage not only allows for use with unbalanced and high impedance signals, but it also provides improved sonic performance adding a hint of Class A sonics to the Class D topology. The buffer is entirely built in-house and removes any possible DC offset from the signal as well as lowers the input sensitivity of the amplifier.

Amphion Amp400.8

The Amphion Amp400.8 is a multi-channel Class D amplifier designed for immersive audio applications providing 410W per channel capable of providing exceptional quality to any speakers in their range.

The Amphion Amp400.8 Class-D amplifier provides plenty of power with a fast transient response and low distortion. A buffer stage was developed in house to improve impedance characteristics and cohesion between all channels to ensure perfect consistency of control, neutrality and distortion. translating into a controlled and emotionally involved sound.

Beautiful Immersive Sound.

Designed primarily for immersive audio, including Dolby Atmos, the Amp400.8 can also be employed for traditional stereo applications powering up to four different pairs of speakers. 

The eight-channel amplifier has been specifically designed to provide outstanding performance with all Amphion speakers from the diminutive One12 studio monitors to the Two18 three-way speakers. It also provides excellent performance with a wide range of third party passive speakers too. 

The Amp400.8 can be used reliably for most surround and immersive setups including 7.1.4 Dolby atmos, 7.1 and 5.1 surround applications.

Beautifully Honest 

Amphion studio monitors provide exceptional performance for professional music makers with outstanding tonal balance, clarity and phase response as well as highly accurate imaging to help musicians, producers and sound engineers achieve their sonic goals faster and in complete confidence. 

The tonal consistency offered throughout the range of speakers makes them ideal for any immersive sound applications including Dolby atmos, delivering superior translation required for critical audio applications.

Connections

The Amp400.8 includes Neutrik XLR and Speakon connectors to provide easy and secure connectivity across the entire system.

This item, like everything we supply, comes with the complete support of our expert team. Our excellent technicians have been specifying, building and supporting studios for over twenty years. If you have any problems with installation, setup or everyday use, they’re never more than a click away, and always happy to help.

You can contact them here.