PMC 8-2 Sub (Left or Right)

PMC 8-2 Sub (Left or Right)

3-way Active Studio Monitors

CAP2: 0 £5,335.00
£4,445.83 ex VAT

Active subwoofer designed to works as a standalone subwoofer in multichannel systems, or as an XBD cabinet, to create a full range system with the paired 6-2 or 8-2 studio monitors.

PMC 8-2 Sub (Left or Right)

3-way Active Studio Monitors

CAP2: 0 £5,335.00
£4,445.83 ex VAT
Visa MasterCard American Express Discover Diners Club Maestro UnionPay Shop Pay Apple Pay Google Pay

Active subwoofer designed to works as a standalone subwoofer in multichannel systems, or as an XBD cabinet, to create a full range system with the paired 6-2 or 8-2 studio monitors.

Novuna Logo

Spread the cost of your purchase over 12-48 Months

AT A GLANCE

  • Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading
  • Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
  • Max. cont. SPL: 115dB @1m (quarter space value calculated as +3dB from half-space measurement.
  • Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifier: 2 x 400W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit, 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP driver protection, EQ, and delay/phase options
  • Dedicated XBD configuration mode
KMR Audio - PMC 8-2 Sub (Left or Right)
KMR Audio - PMC 8-2 Sub (Left or Right)

Active subwoofer designed to works as a standalone subwoofer in multichannel systems, or as an XBD cabinet, to create a full range system with the paired 6-2 or 8-2 studio monitors.

The PMC 8-2 Sub is an active subwoofer designed to works as a standalone subwoofer in multichannel systems, or as an XBD cabinet, to create a full range system with the paired 6-2 or 8-2 studio monitors.

The PMC 8-2 Sub includes twin 8” long-throw bass drivers, each powered by an independent 400W Class D amplifier. it offers higher SPL and an extended frequency response down to 25Hz. The built-in DSP engine offers sophisticated room boundary controls as well as parametric EQ, time, phase inversion and the XBD mode to offer perfectly configured performance with the 6-2 and 8-2 speakers. These controls are accessible on the rear panel of the speaker or by using PMC’s SoundAlign browser-based software.

The PMC 8-2 Sub comes in a left or right configuration with the bass drivers on the outside edge. Combined with the PMC 6-2 or 8-2 it creates a full-range system with impressive power and dynamic range. A single subwoofer can however be employed in a multichannel or immersive sound system if required.

More From

At a glance

  • Active subwoofer with twin 8-inch bass drivers and ATL™ bass loading
  • Frequency response: 25Hz - 500Hz (- 3dB) (@1m full space, on-axis)
  • Max. cont. SPL: 115dB @1m (quarter space value calculated as +3dB from half-space measurement.
  • Unweighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifier: 2 x 400W
  • Analogue/AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit, 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP driver protection, EQ, and delay/phase options
  • Dedicated XBD configuration mode

Alternative Products