+44 20 8445 2446
Crossfeed Control
Experience a natural headphone listening environment with the SPL 2Control’s Crossfeed feature, which simulates the stereo imaging of loudspeakers for accurate sound judgment.
The SPL 2Control Analogue Monitor Controller has a unique Crossfeed control that allows you to judge a stereo panorama on headphones, just like with loudspeakers.
The concept of the SPL 2 Control is based on a dual-channel operation that allows for connection of two sources, two stereo speaker sets and two headphones. Each of the three speaker outputs (2 stereo sets, 1 x mono speaker) is driven by its own balancing stage to exclude signal degrading mutual influences. Each headphone output is supplied by a separate amplifier to allow for completely independent operation of two headphones without any interaction from the other output.
A new feature of the 2Control is the Crossfeed control for both headphone outputs, which was derived from the high-end headphone amplifier Phonitor. From their principle, headphones have the disadvantage of producing a 180 degree stereo panorama – the Crossfeed control can be used to adjust a stereo panorama that corresponds to a stereo speaker image.
- Two channels, Two sources, Two loudspeaker sets, Two headphones
- Analogue volume control for your DAW
- Two excellent headphone amplifiers
- Crossfeed control
- Extend the range of headphone applications
- High-grade balancing stages
- Unbalanced connection (e.g. RCA, TS Jack)
- Separate mono speaker output
- Input sockets: XLR
- Output sockets: XLR, Stereo TRS
- Nominal input level: IN 1: +4dBu, IN 2: +4dBu/-10dBV
- Input impedance: 22kOhm
- Output impedance: 75Ohm/Headphones: 22Ohm
- Max. input level: 21,3dBu
- Max. output level: 21,3dBu
- Volume control range: -80dB to +6,6dB
- Headphones: -65dB to +14,9dB
- Frequency range: 10Hz to 100kHz (-3dB)
- CMRR: ›60dB (@1kHz, 0dBu input level, unity gain)
- THD: 0,002% (@1kHz, 0dBu input level, unity gain)
- Signal to noise ratio: -96dB/Headphones: -85dB (A-weighted)
- Crosstalk L/R: ›70dB (@1kHz)
- Dynamic range: 116dB
- Power consumption: ca. 25W
- Features: Toroidal transformer with voltage selector
- Fuses (slow blow): 230V/50Hz: 315mA, 120V/60Hz: 630mA
- Dimensions: (WxHxD): 215x80x220mm
- Weight: 2,1kg
- UK over £99 FREE
- UK under £99 £10
- EU £36
- Rest of World £80
Large/Heavy items: Extra charges may apply (e.g., consoles, large monitors). We’ll contact you before processing if so.
We ship with DPD and UPS across the UK, EU and worldwide. Same-day within the M25 is available depending on stock from £48.
At KMR, we provide exceptional support for all your audio studio requirements. Our committed team is ready to help you with setup, troubleshooting, and optimizing your gear for peak performance.
If you face any challenges, our customer service team is just a phone call away, prepared to offer expert assistance.
KEY FEATURES
Dual-Channel Flexibility
Connect and control two separate audio sources, along with two stereo speaker sets and two headphones, enabling versatile studio setups and switching with ease.
Dedicated Amplifiers
Each headphone output is powered by its own dedicated amplifier, ensuring that two users can listen simultaneously without compromising audio quality or volume levels.
PRODUCT VIDEOS
