Barefoot Sound MicroMain 26 MM26 (Pair)

The Barefoot MicroMain26 is a 4-way active speaker with 6 drivers housed in a sealed cabinet.

The Barefoot MicroMain26 boasts two 5"25 woofers a 2.5" midrange cone and Ring radiator. The 5"25 drivers boasts a raft of features ensuring super tight bass and lower mids. The midrange cone sits in a cutting-edge 3D printed waveguide enclosure. Barefoot's ring radiator ensures superior detail and wide dispersion of high frequency 

The Barefoot MM26 have a wide frequency response from 30Hz to 45kHz. What's more its produces low distortion, superior dynamic range and ultra-fast transient response. Like all the other Barefoot speakers, the MM26 uses Hypex for transparent amplification. A new DSP crossover system and high-end converters provide truly revealing sound.

MEME technology is also employed, emulating NS10, Auratones and Hi-Fi speakers. These extra voicings give the engineers useful sets of reference without extra speakers. Mixing on the "flat" setting will provide the Barefoot MM26 true sound. Switching to the Old School setting will switch the speakers into NS10 mode. This will provide a restricted bandwidth with emphasis on the midrange. The Cube "mode" will recreate the sound of the Auratone speakers. Hi-fi will recreate the sound of high-quality Hi-fi speakers sounding  warmer and sweeter. MEME technology does not strive to exactly recreate the sound of those speakers. Instead, it recreates some of its idiosyncrasies to recreate the impression of working with those speakers.

Barefoot MicroMain26 Main Features:

• Description: 4-way active monitor with MEME(tm) Technology
• Controls: Analog/AES3 input select, AES3 L/R channels select,
• Input level stepped attenuator, Subwoofer level, Emulation voice select
• Input Impedance: 50k Ohm
• Frequency Response: 30Hz - 45kHz (±3dB) 40Hz - 40kHz (±1dB)
• Bass Response: -3 dB @ 30Hz, Q = 0.707 Slope = 12 dB/octave
• Cabinet: 32 liters total internal volume, Sealed subwoofer, Sealed
• 3D printed rear waveguide midrange enclosure, Sealed woofer enclosures,
• Machined aluminum baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout

• Crossover Frequencies: 100 / 800 / 4000 Hz
• Tweeter: 1" ring radiator, Advanced geometry motor, Rear waveguide chamber. Amplifier: 180W Hypex

• Midrange: 2.5" aluminum cone, Advanced geometry motor, +/- 2 mm
• linear excursion. Amplifier: 180W Hypex
• Woofers: 2 x 5.25" poly/paper cone, Advanced geometry neodymium
• motor, +/- 5 mm linear excursion. Amplifier: 250W Hypex
• Subwoofers: 2 x 10" aluminum cone with high linearity motor, +/-
• 13 mm linear excursion Amplifier: 500W Hypex
• AC Power Input: Nominal 115 VAC or 230 VAC selectable
• Power Consumption: Idle: 30W, Maximum: 650W
• Weight: Speaker: 71 lbs each (32 kg) Shipping: 83 lbs each (38 kg)
• Dimensions HxWxD: Cabinet: 20.5 x 9.5 x 15.5 inches (521 x 241 x 394 mm), Overall: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm)

This item, like everything we supply, comes with the complete support of our expert team. Our excellent technicians have been specifying, building and supporting studios for over twenty years. If you have any problems with installation, setup or everyday use, they’re never more than a click away, and always happy to help.

You can contact them here.