Barefoot Sound Footprint02 (Pair)

3-Way Active Nearfield Studio Monitors

CAP2: 0 £2,995.00
£2,495.83 ex VAT
in stock

3-way monitor with side-mounted dual-opposing 6.5” subwoofers, dual ring radiator tweeter, and MEME technology.

The Barefoot Footprint02 is a 3-way monitor with side-mounted dual-opposing 6.5" subwoofers, dual ring radiator tweeter, and MEME technology.

The Barefoot Footprint02 offers the same form-factor as the Footprint01 in a smaller size. It features the same side-mounted dual opposing 6.5"; paper-cone subwoofers and dual ring radiator tweeter positioned below the aluminium cone midrange driver set in an aluminium front baffle.

On the inside, the Footprint is nearly identical to its older sibling with a similar 2-way DSP crossover feeds with dual Class D amplifiers. The Dual-force subwoofers are mounted in opposition, eliminating cabinet vibration and ensuring a tight sound with deep bass extension. The dual ring tweeter, another key component, provides a wide dispersion of high frequencies for a wide stereo image and sweet spot.

The Footprint02 includes Barefoot's patented Multi-Emphasis Monitor Emulation (MEME) technology to emulate three different speakers including the revered NS10 and MixCubes and Hi-fi speakers. MEME not only mimics the frequency characteristics of these speakers but also their response at the flick of a switch.

Barefoot Footprint02 Main Features:

  • Description: 3-way active monitor with MEME™ voice emulation
  • Controls: Input level stepped attenuator, MEME voice select
  • Input Impedance: Balanced XLR, 50k Ohm Impedance
  • Sensitivity: 90dB @ 1 meter with -15dBV input signal (Level control set to 0dB)
  • Frequency Response: 42Hz – 45kHz (±3dB), 52Hz – 40kHz (±1dB)
  • Bass Response:-3 dB @ 36Hz, Q = 0.707 Slope = 18 dB/octave
  • Cabinet: 13 litres total internal volume, Sealed woofer and midrange enclosures, Machined aluminium baffle plate, Polyurethane acoustic damping throughout
  • Crossover Frequencies: 180 / 3600 Hz (Passive crossover between Midrange and Tweeter)
  • Tweeter: 1″ ring radiator, Low distortion motor, Rear waveguide chamber
  • Midrange: 4.0″ aluminium cone, Aluminum phase plug, Low distortion motor, +/- 3.5 mm linear excursion
  • Woofers: 6.5″ paper cone, +/- 8.2 mm linear excursion
  • High-Frequency Amplifier: 150W
  • Low-Frequency Amplifier: 200W
  • AC Power Input: 85 VAC to 265 VAC
  • Power Consumption: Idle: 2W, Maximum: 320W
  • Weight: Speaker: 27.9 lbs each (12.66 kg)
  • Shipping: 33.6 lbs each (15.25 kg)"
  • Dimensions HxWxD: 12.12 x 8.7 x 13.0 inches (308 x 222 x 330 mm)
  • Alternative Products