+44 20 8445 2446
Superior Sound Quality
The Barefoot MicroMain26 features a state-of-the-art design including a 3D-printed waveguide and ring radiator for outstanding detail and expansive high-frequency dispersion, ensuring a crystal-clear listening experience.
The Barefoot MicroMain26 is a 4-way active speaker with 6 drivers in a sealed cabinet.
The Barefoot MicroMain26 boasts two 5"25 woofers, a 2.5" midrange cone, and a Ring radiator. The 5"25 drivers' features ensure super tight bass and lower mids. The midrange cone sits in a cutting-edge 3D-printed waveguide enclosure. Barefoot's ring radiator ensures superior detail and wide high-frequency dispersion.
The Barefoot MM26 have a wide frequency response from 30Hz to 45kHz. What's more, its produces low distortion, superior dynamic range and ultra-fast transient response. Like all the other Barefoot speakers, the MM26 uses Hypex for transparent amplification. A new DSP crossover system and high-end converters provide truly revealing sound.
MEME technology is also employed, emulating NS10, Auratones and Hi-Fi speakers. These extra voicings give the engineers useful sets of references without extra speakers. Mixing on the "flat" setting will provide the Barefoot MM26 true sound. Switching to the Old School setting will switch the speakers into NS10 mode. This will provide a restricted bandwidth with an emphasis on the midrange. The Cube "mode" will recreate the sound of the Auratone speakers. Hi-fi will recreate the sound of high-quality Hi-fi speakers sounding warmer and sweeter. MEME technology does not strive to recreate the sound of those speakers exactly. Instead, it recreates some of its idiosyncrasies to recreate the impression of working with those speakers.
- 4-way active monitor with MEME(tm) Technology
- Controls: Analog/AES3 input select, AES3 L/R channels select,
- Input level stepped attenuator, Subwoofer level, Emulation voice select
- Input Impedance: 50k Ohm
- Frequency Response: 30Hz - 45kHz (±3dB) 40Hz - 40kHz (±1dB)
- Bass Response: -3 dB @ 30Hz, Q = 0.707 Slope = 12 dB/octave
- Cabinet: 32 litres total internal volume, Sealed subwoofer, Sealed
- 3D printed rear waveguide midrange enclosure, Sealed woofer enclosures,
- Machined aluminium baffle plate, Aluminum subwoofer frames function as lateral cabinet bracing, Long fiber wool acoustic damping throughout
- Crossover Frequencies: 100 / 800 / 4000 Hz
- Tweeter: 1" ring radiator, Advanced geometry motor, Rear waveguide chamber. Amplifier: 180W Hypex
- Midrange: 2.5" aluminium cone, Advanced geometry motor, +/- 2 mm
- linear excursion. Amplifier: 180W Hypex
- Woofers: 2 x 5.25" poly/paper cone, Advanced geometry neodymium
- motor, +/- 5 mm linear excursion. Amplifier: 250W Hypex
- Subwoofers: 2 x 10" aluminium cone with high linearity motor, +/-
- 13 mm linear excursion Amplifier: 500W Hypex
- AC Power Input: Nominal 115 VAC or 230 VAC selectable
- Power Consumption: Idle: 30W, Maximum: 650W
- Weight: Speaker: 71 lbs each (32 kg) Shipping: 83 lbs each (38 kg)
- Dimensions HxWxD: Cabinet: 20.5 x 9.5 x 15.5 inches (521 x 241 x 394 mm), Overall: 20.5 x 10.5 x 17.4 inches (521 x 267 x 442 mm)
- UK over £99 FREE
- UK under £99 £10
- EU £36
- Rest of World £80
Large/Heavy items: Extra charges may apply (e.g., consoles, large monitors). We’ll contact you before processing if so.
We ship with DPD and UPS across the UK, EU and worldwide. Same-day within the M25 is available depending on stock from £48.
At KMR, we provide exceptional support for all your audio studio requirements. Our committed team is ready to help you with setup, troubleshooting, and optimizing your gear for peak performance.
If you face any challenges, our customer service team is just a phone call away, prepared to offer expert assistance.
KEY FEATURES
Versatile Frequency Response
With a broad frequency range from 30Hz to 45kHz combined with low distortion and an ultra-fast transient response, the MM26 provides an exceptionally dynamic and accurate audio reproduction suitable for professional mixing and listening.
Innovative MEME Technology
Equipped with MEME technology, the Barefoot MM26 can emulate different classic speaker sounds like NS10, Auratones, and high-quality Hi-Fi speakers. This allows engineers to reference and mix with versatility, all within a single pair of speakers.