Amphion Two18 and Amp700 Powered Studio Monitors

Amphion Studio Monitors and Amp and Speaker Cable

CAP2: 0 $10,212.00
$8,510.00 ex VAT
Call or Email for availability.

Inclides two Amphion Two18 powered by the Amp700 amplifier.

The Amphion Two18 is a two-way, passive studio monitors with passive radiator designed to provide a new level a monitoring excellence.

The Amphion Two18 is a high-resolution nearfield studio loudspeaker using a passive radiator at the back for extended LF response. It uses two 6.5” aluminium woofers and a 1” soft dome titanium tweeter.  The Two18 are extremely natural sounding with a balanced and musical tonality as well as highly accurate phase coherence even at low levels.

The Two18 displays the same high-level midrange integration and low crossover point as other Amphion studio monitors which ensures unrivalled detail and clarity. Moreover, the Two18 produce predictable results which translate well on other setups and systems. This is very useful for mixing and mastering engineers who require a trustworthy and predictable reference. Its natural timbre and high resolution allows for extended use without incurring listening fatigue.

The Two18 lets you hear reverb tails clearly, fast sharp transients which translates in superb imaging, spatial and dynamic detail.

Amphion Two18 Passive Studio Monitors Features:

  • 2 way, passive radiator speaker
  • 1" titanium HF
  • 2 x 6.5" aluminium LF
  • Crossover point: 1600Hz
  • Impedance: 4 ohm
  • Sensitivity: 89 dB @ 2.83V/1m
  • Frequency response: 40 - 20 000 Hz +/-3dB
  • Power recommendation: 50 - 200 W
  • Measurements (h x w x d): 550 x 191 x 315 mm
  • Weight: 18 kg
  • Colour: black

The Amphion Amp700 is a Class D stereo amplifier with a Class A buffer-stage capable of delivering enough power to all Amphion speaker models.


The Amphion Amp700 provides 2x350 Watts into 8 Ohms and 2x700 Watts into 4 Ohm with vanishingly low distortion and high resolution across the entire frequency spectrum. 


The Class A buffer-stage not only allows for use with unbalanced and high impedance signals, but it also provides improved sonic performance adding a hint of Class A sonics to the Class D topology. The buffer is entirely built in-house and removes any possible DC offset from the signal as well as lowering the input sensitivity of the amplifier.


Amphion Amp700 Main Features:


  • 2 x 350 W into 8Ω or 2 x 700W into 4Ω @ 1% THD
  • In-house Class Buffer stage
  • 100kHz load-independent frequency range (-3dB)
  • Almost flat THD vs frequency
  • AUX output for third hanger channel
  • 2U rackmount
  • XLR input
  • 4 x Argento Audio 3 way binding post for banana's, bare wire or spades.
  • Alternative Products