Avantone CK-6

Avantone CK-6

Large Diaphragm Condenser Microphone

CAP2: 0 £185.00
£154.17 ex VAT
Call or email for availability.

Large Capsule Cardioid FET Condenser Microphone.

Avantone CK-6

Large Diaphragm Condenser Microphone

CAP2: 0 £185.00
£154.17 ex VAT
Call or email for availability.
Visa MasterCard American Express Discover Diners Club Maestro UnionPay Shop Pay Apple Pay Google Pay

Large Capsule Cardioid FET Condenser Microphone.

Novuna Logo

Spread the cost of your purchase over 12-48 Months

AT A GLANCE

  • Type: True Transformerless Condenser
  • Polar Pattern: Cardioid
  • Capsule: Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)
  • Frequency Response: 35-20,000 Hz +/- 3.5dB
  • Output Impedance <=200 Ohms
  • Maximum SPL 136dB (0.5% THD @1000Hz)
  • Equivalent Noise Level <17dB
  • Output Connector: Male XLR 3-pin
  • High-Pass Switch: 80 Hz 6dB/octave
  • Attenuation Switch: -10 dB
  • Power Requirement: Standard 48 Volt Phantom / 5mA
  • Included Accessories: Shockmount, Wooden Box in Metal Carrying Case
  • Dimensions: 155mm x 46mm
  • Weight: .4 kg / .9 lb
  • Finish: Polished Nickel trim / Metallic Cabernet Red Body
KMR Audio - Avantone CK-6
KMR Audio - Avantone CK-6

Large Capsule Cardioid FET Condenser Microphone.

The Avantone CK-6 Large Capsule Cardioid FET Condenser Microphone is designed to offer true professional performance. The design, character and performance can be compared directly to fine studio-standard FET mics but at a fraction of their cost.

The rugged Avantone CK-6 microphone body and capsule assembly are precision machined of brass. Aesthetically, it features an elegant Cabernet Wine-Red finish, accented with polished nickel trim and capsule assembly. The transformerless Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs. The CK-6 houses a 32mm gold-sputter thin Mylar capsule.

The CK-6 in its normal stock version uses high grade Polystyrene and Metalized Polypropylene capacitors in the audio path. Any studio can proudly offer the CK-6 for instrumental and vocal miking exudes class visually as well as sonically.

Manufactured using the finest materials yielding a very solid feel, superb structural integrity and rugged reliability. The versatile CK-6 mic is able to produce professional results with a clean sonic character.

The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

The CK-6 has separate -10 dB pad & 80 Hz LF roll-off switches. The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics. The 80Hz high-pass filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from "muddying up" the track.

More From

At a glance

  • Type: True Transformerless Condenser
  • Polar Pattern: Cardioid
  • Capsule: Single-sided 32mm center-terminated gold-sputtered Mylar (6 micron)
  • Frequency Response: 35-20,000 Hz +/- 3.5dB
  • Output Impedance <=200 Ohms
  • Maximum SPL 136dB (0.5% THD @1000Hz)
  • Equivalent Noise Level <17dB
  • Output Connector: Male XLR 3-pin
  • High-Pass Switch: 80 Hz 6dB/octave
  • Attenuation Switch: -10 dB
  • Power Requirement: Standard 48 Volt Phantom / 5mA
  • Included Accessories: Shockmount, Wooden Box in Metal Carrying Case
  • Dimensions: 155mm x 46mm
  • Weight: .4 kg / .9 lb
  • Finish: Polished Nickel trim / Metallic Cabernet Red Body

Alternative Products