Special Order

Radial Engineering Reamp Station - Studio Reamper & Direct Box

Reamper module

The Radial Reamp JCR Studio Reamper is a professional passive reamping box featuring John Cuniberti's original transformer-based circuitry, balanced XLR and TRS inputs, an isolated instrument-level output, variable level control, three-position filtering, polarity reversal and integrated muting for flexible, low-noise guitar, bass and keyboard reamping.

Read More

£450.00 £375.00 ex VAT

AVAILABLE TO ORDER

This item can still be purchased. Checking latest availability…

Check Availability

WHY CHOOSE TO BUY FROM KMR AUDIO?

  • 20+ Years Industry Experience
  • Rated “Excellent” By Our Customers
  • Lifetime Tech Support, Always Free
  • Easy 14 Day Returns

The Radial Reamp JCR Studio Reamper is a professional passive, transformer-isolated reamping box that converts balanced line-level recordings into unbalanced instrument-level signals, allowing engineers to send recorded guitar, bass and keyboard performances through amplifiers and effects processors with precise level control, low noise and vintage analogue character.

Overview

The Radial Reamp JCR recreates John Cuniberti's original 1993 reamping design, combining its renowned custom-wound USA-made transformer with practical controls for modern recording workflows. Its fully passive circuitry requires no external power and provides a straightforward way to re-record previously captured performances through guitar amplifiers, bass amplifiers and effects pedals.

The JCR allows engineers to experiment with amplifier settings, microphone placement and signal processing without requiring musicians to repeat their performances. Its transformer-isolated output also helps eliminate ground-loop hum while maintaining signal integrity.

Original Reamping Circuitry and Transformer Design

The Reamp JCR incorporates the same transformer technology and circuitry as John Cuniberti's original reamping design. Its custom-wound transformer provides galvanic isolation between recording equipment and instrument amplifiers, helping prevent ground-loop noise.

The transformer also introduces subtle analogue characteristics when engineers drive it with higher signal levels. This naturally rounds out the tone, adding warmth and a vintage character while retaining excellent transparency.

The JCR delivers a frequency response of 20Hz to 20kHz (+0dB/-1dB), a dynamic range of 140dB and total harmonic distortion of just 0.001% at 1kHz with a 0dBu input.

Flexible Connectivity and Signal Control

The Radial Reamp JCR features balanced XLR and ¼-inch TRS inputs, allowing direct connections from professional audio interfaces, mixing consoles and recording systems.

Its transformer-isolated ¼-inch unbalanced output delivers an instrument-level signal suitable for guitar amplifiers, bass amplifiers and effects pedals. A variable output level control allows engineers to match the signal strength to the requirements of different amplifiers and processors.

The JCR also supports the integration of external effects pedals between its output and the amplifier, expanding the range of available sounds during reamping sessions.

Three-Position Filter and Polarity Control

A three-position filter switch provides additional control over the signal's tonal characteristics. Engineers can use the filtering options to tame excessive high frequencies, adjust low-frequency warmth and reduce muddiness, or bypass the filter for a linear response.

An integrated polarity reversal switch helps compensate for amplifiers and effects processors that invert signal polarity. This becomes particularly useful when combining reamped signals with other recorded tracks, where polarity relationships can affect the resulting tone.

Integrated Mute Function

The Reamp JCR includes a dedicated mute switch that interrupts the signal feeding its ¼-inch output.

This allows engineers to reposition microphones, adjust amplifier settings and make changes to the recording environment without sending audio through the amplifier. The function provides convenient control during recording sessions and helps streamline complex reamping workflows.

Passive Operation and Durable Steel Construction

The JCR uses entirely passive circuitry, eliminating the need for batteries, external power supplies or mains connections.

Its robust 14-gauge steel chassis features Radial's distinctive book-end construction, which provides electromagnetic shielding and helps protect the connectors, switches and potentiometers from physical damage.

A baked enamel finish adds further durability, making the JCR suitable for demanding professional recording environments.

Technical Specifications

  • Audio Circuit Type: Passive, transformer-isolated
  • Frequency Response: 20Hz to 20kHz (+0dB/-1dB
  • Dynamic Range: 140dB
  • Total Harmonic Distortion (THD): 0.001% at 1kHz/0dBu input
  • Intermodulation Distortion (IMD): 0.0025% at 1kHz/-10dB input
  • Phase Deviation: 2° at 100Hz, 0° at 800Hz
  • Input Impedance: 1.8kΩ
  • Output Impedance: 4.8kΩ
  • Common Mode Rejection Ratio: -55dB at 55Hz
  • Noise: -115dBu
  • Maximum Input: +26dBu
  • Input Connectors: Balanced XLR and ¼-inch TRS
  • Output Connector: ¼-inch unbalanced
  • Construction: 14-gauge steel chassis and outer shell
  • Power Requirements: Passive, no external power required
  • Operating Conditions: 5°C to 40°C, dry environments only
  • Dimensions: 84 × 127 × 48mm
  • Weight: 600g
  • Product Code: R800-1030-00

Why Choose the Radial Reamp JCR Studio Reamper?

  • Explore more tones from a single performance: Experiment with different amplifiers, pedals and microphone placements without recording another take.

  • Preserve the character of the original recording: The classic transformer design combines signal transparency with subtle analogue warmth.

  • Reduce unwanted noise: Transformer isolation helps prevent ground-loop hum when connecting studio equipment to instrument amplifiers.

  • Fine-tune reamping results: Adjustable output level, filtering and polarity controls offer greater flexibility during recording and mixing.

  • Simplify studio setup: Passive operation eliminates additional power supplies and unnecessary cabling.

  • Invest in long-term reliability: Rugged steel construction withstands regular use in professional studios.

  • Fully passive reamping circuitry requires no external power supply.
  • Custom-wound USA-made transformer follows John Cuniberti's original 1993 design.
  • Transformer isolation helps eliminate ground-loop hum and unwanted noise.
  • Converts balanced line-level signals into unbalanced instrument-level outputs.
  • Balanced XLR and ¼-inch TRS inputs support professional recording equipment.
  • Transformer-isolated ¼-inch output connects to guitar and bass amplifiers.
  • Variable output level control adjusts the signal feeding the amplifier.
  • Three-position filter switch offers tonal shaping and a linear bypass setting.
  • Polarity reversal switch compensates for signal inversion.
  • Integrated mute switch interrupts the output during microphone adjustments.
  • Supports external effects pedals and processors in reamping signal chains.
  • 20Hz to 20kHz frequency response provides full-range audio reproduction.
  • 140dB dynamic range supports high-quality studio applications.
  • 14-gauge steel enclosure provides durability and electromagnetic shielding.
  • Protective book-end chassis design helps safeguard controls and connectors.
DPD UPS
  • UK over £99 FREE
  • UK under £99 £10
  • EU £36
  • Rest of World £80

Large/Heavy items: Extra charges may apply (e.g., consoles, large monitors). We’ll contact you before processing if so.

We ship with DPD and UPS across the UK, EU and worldwide. Same-day within the M25 is available depending on stock.

This item, like everything we supply, comes with the complete support of our expert team. Our excellent technicians have been specifying, building and supporting studios for over twenty years. If you have any problems with installation, setup or everyday use, they’re never more than a click away, and always happy to help.

You can contact them here.

Radial Engineering Reamp Station - Studio Reamper & Direct Box

Radial Engineering Reamp Station - Studio Reamper & Direct Box

Reamper module

AVAILABLE TO ORDER

KEY BENEFITS

Transform Your Recordings Effortlessly

Easily convert balanced line-level recordings into unbalanced instrument-level signals, enabling seamless integration with amplifiers and effects for enhanced sound experimentation.

Vintage Character with Modern Control

Enjoy the warmth and transparency of vintage analogue sound while maintaining precise level control, allowing for creative flexibility in your recording sessions.

Durable and Reliable Design

Built with robust steel construction and passive circuitry, this reamper ensures longevity and reliability in demanding professional environments without the need for external power.